PRODUCTS CENTER

GYB-10 Optical Cable Flattening Tester

(1) Purpose: This equipment is suitable for testing the ability of optical cables to withstand crushing. By applying a crushing force, qualified optical cables must meet the following requirements: the optical fibers do not break, the attenuation change of the optical fibers does not exceed the value specified in the optical cable product standard, and the optical cable sheath does not crack. Compliant standard: IEC 60794-1-2:2003 E3. (2) Features: This equipment adopts computer control, servo motor drive, precision ball screw transmission for loading, and precision load.

(Purpose:

This device is suitable for testing the ability of optical cables to withstand crushing forces. A crushing force is applied, and for qualified optical cables, the optical fibers must not break, the attenuation change must not exceed the value specified in the cable product standard, and the cable sheath must not crack.

Compliant standard: IEC60794-1-2:2003E3

(2) Features:

This device is computer-controlled, servo motor-driven, and uses precision ball screws for load transmission, with precise load sensor signal measurement. It features smooth loading, accurate measurement, fast control response, multiple control modes, convenient and accurate digital calibration of load, as well as full-load and position protection.

Technical specifications:

Product Name: GYB-10

2) Maximum test force: 5 kN

3) Force measurement range: (1% to 100%) F.S.

4) Force resolution: ±250,000 codes, no range switching throughout, constant resolution

5) Load cell accuracy: ±0.5%

6) Force holding time: Adjustable

7) Load cell relative error: ±0.5%

8) Displacement display resolution: 0.001mm

9) Displacement control resolution: 0.00002 mm

10) Displacement display accuracy: ±0.5%

11) Displacement speed adjustment range: (0.01～500) mm/min, freely adjustable.